Multirail adapters for use with all Multirail systems. Each adapter comes with a 118" connector cord with the patented Stas rail connector plug at one end and 4" 90-305V 5amp power cord on the other; dimming capability is 0-10V (10-100%)

Home > Hanging and LED Lighting > Ceiling Mounted Systems With Lighting > Multirail FLAT Lighting system >

Multirail Dimmable Driver - 100W with output cable

STAS Multirail Dimmable Adapter - 100W

Alternative Views:

Our Price: $99.80

Availability:: Subject to availability
Product Code: VT10100D

Qty:

Description

Mounting Instructions

Multirail adapter for use with all Multirail systems. Each driver comes with a 118" (300 cm) connector cable with the patented Stas rail connector plug, which will be needed to connect the driver to your Stas Multirail. The driver's input is 90-264VAC 8.5amp 47-63Hz. The dimming capability is 0-12V (10-100%), dimmer sold separately. UL tested and approved, this 100 watt adapter allows up to 30 LED 3 watt lights on a maximum rail length of 52 1/2 feet, or 4 halogen 20 watt lights. It is compatible with our 3 watt LED lights, available in warm, warm white or neutral.

Consult a certified professional electrician for installation.

You can add any number of drivers to our Stas multirail systems increasing the number of lights to any room. By separating the internal rail conductor you can have full control over how your lights turn on and off. Turn on an entire room from one switch or control each wall separately. Whichever you choose our rail systems allow you full control. For more information call our offices and speak directly with our technicians ready to help you develop a system that suites your needs.

Features

	Stas Multirail Adapter VT20300, not dimmable	Stas Multirail Adapter VT20400, not dimmable	Stas Multirail Adapter VT10100D, dimmable

Power Wattage	96 Watts	60 Watts	100 Watts
Voltage	12 volt DC	12 volt DC	12 volt DC
Amperage	8 amp	5 amp	8.5 amp
Max. Rail Length Halogen Lights	26 1/4'	26 1/4'	26 1/4'
Max. Rail Length LED Lights	52 1/2'	52 1/2'	52 1/2'
Maximum Bulbs Halogen 20w	4	2	4
Maximum Bulbs LED 3w	30	15	30
Input	AC 100-240V ~ 50/60Hz 2A	AC 100-240V ~ 50/60Hz 1.6A	AC 90-264V ~ 47-63Hz 2.2A
Output	DC 12V == 8A	DC 12V == 5A	DC 12V == 8.5A
Dimensions	5 7/8" x 2 1/2" x 1 1/2"	5 1/8" x 2 1/8" x 1 1/4"	7 5/16" x 1 15/16" x 1 7/16"
Weight	21.16 oz (600 grams)	16.93 oz (415 grams)	124 oz (1.75 lb)
Connection Input	18AWG NEMA 1-15P 3.3' IEC 320-C7, Polarized 125V, 10A AC	18AWG NEMA 1-15P 3.3' IEC 320-C7, Polarized 125V, 10A AC	1', wall plug not included
Connection Output	Patented cable 118" (3 mtrs)	Patented cable 118" (3 mtrs)	Patented cable 118" (3 mtrs)
Certifications	CE, UL, ROHS	CE, UL, ROHS	CE, UL

Average Rating: Average Rating: 5 of 5

5 of 5 Total Reviews: 2 Write a review »

0 of 0 people found the following review helpful:

	December 12, 2022
Reviewer: Jonathan H from Las Vegas, NV United States

Was this review helpful to you?

1 of 1 people found the following review helpful:

Dimmer Driver	April 17, 2017
Reviewer: Rob Johnson from Englewood, CO United States

A little more complicated to install since you have to connect each piece together and add a 2-wire electrical plug to the power driver. You need some basic electrical skills or find some assistance to ensure all the wires and your electrical plug are connected properly.

Was this review helpful to you?

Browse for more products in the same category as this item: